C2-2200 Video Scaler is based on TV One’s exclusive CORIO2™ technology and provides high scaling to Analog or DVI Computer or HDTV signals. NTSC and PAL video standards are supported. Inputs can be 2x Composite or 2x S-Video or one of each, plus YUV Component or YPbPr. C2-2205 provides an SDI Input as well. A computer bypass is also provided. RGB/YpbPr Scaling permits the computer input signals to be scaled with the same flexibility as the video inputs. The output is selectable as any computer resolution up to 2048x2048 at any vertical refresh rate and all HDTV resolutions up to 1080p. A wide variety of computer signal formats are available to support PC, Mac and Workstation formats.

All the functions can be controlled via the front panel Push Buttons, an Infrared Control Remote Unit or via an RS-232 or IP connection. A Windows Control Panel is provided and most third party control systems interface directly with the entire C2 range of products. A front panel LCD makes setup easy.

Variable Zoom to 10X allows you to enlarge any part of the video image to fill the entire computer screen and position controls allow you to move around to any area desired. Variable Shrink to as little as 10% allows fitting the image onto most displays. The advanced Digital Flicker Elimination circuitry and high sampling rate insures crisp, clear images, while full bandwidth chroma sampling insures faithfully reproduced, high res colors. A 4x1 integral stereo audio routing switcher provides unbalanced inputs and output to follow the video input selection. A rear panel terminal block provides access.

Input Expansion is available for all models by choosing the appropriate S2 Series Input Switcher, which links to the main unit via an Options Interconnect Cable. The routing of these additional inputs is controlled directly from the C2-2000 Series converter’s control system.