C2-2200 Video Scaler is based on TV One’s exclusive CORIO2™ technology and provides high scaling to Analog or DVI Computer or HDTV signals. NTSC and PAL video standards are supported. Inputs can be 2x Composite or 2x S-Video or one of each, plus YUV Component or YPbPr. C2-2205 provides an SDI Input as well. A computer bypass is also provided. RGB/YpbPr Scaling permits the computer input signals to be scaled with the same flexibility as the video inputs. The output is selectable as any computer resolution up to 2048x2048 at any vertical refresh rate and all HDTV resolutions up to 1080p. A wide variety of computer signal formats are available to support PC, Mac and Workstation formats.

All the functions can be controlled via the front panel Push Buttons, an Infrared Control Remote Unit or via an RS-232 or IP connection. A Windows Control Panel is provided and most third party control systems interface directly with the entire C2 range of products. A front panel LCD makes setup easy.

Variable Zoom to 10X allows you to enlarge any part of the video image to fill the entire computer screen and position controls allow you to move around to any area desired. Variable Shrink to as little as 10% allows fitting the image onto most displays. The advanced Digital Flicker Elimination circuitry and high sampling rate insures crisp, clear images, while full bandwidth chroma sampling insures faithfully reproduced, high res colors. A 4x1 integral stereo audio routing switcher provides unbalanced inputs and output to follow the video input selection. A rear panel terminal block provides access.

C2-2250 Video Scaler PLUS has all the functions and features of the C2-2200 and adds a wide variety of additional capabilities, including Picture-In-Picture, Chromakey, Lumakey and Mixing. The Key Mode allows computer graphics to be keyed over an external Composite or S-Video signal or visa versa. The keyed image may be faded in and out. Due to the 4:4:4 sampling format, precise keying at the pixel level can be achieved. The Mix Mode permits glitch-free mixing between the computer image and external video. The PIP Mode allows either of the computer inputs to be inset in a window over either of the video inputs or visa versa.

Our exclusive AutoSet® feature takes the hassle out of setup by automatically sizing and positioning the computer image to fit exactly on the video screen. All settings are stored in non-volatile memory and are retained even when power is switched off. C2-2255 provides an SDI Input as well. Optional rackmount kits are available for all C2-2000 models.

Input Expansion is available for all models by choosing the appropriate S2 Series Input Switcher, which links to the main unit via an Options Interconnect Cable. The routing of these additional inputs is controlled directly from the C2-2000 Series converter’s control system.