| Model: 140-066103-01 (D16HD-HS) Specifications |
| Type |
HS Series Projector |
| Image |
| Brightness (lumens) |
15,750 ISO • 14,000 ANSI |
| Color wheel |
4 segment (RGBY) – 2X or 3X speed |
| Contrast (nominal) |
• Full on/off (Christie RealBlack enabled): 2,000,000:1 • Dynamic contrast: 5000:1
• Full on/off (Christie RealBlack disabled): 1200:1 • ANSI 250:1 |
| Display technology |
| Type |
1 x 0.96" DMD |
| Native resolution |
1920 x 1080 (2,073,600 pixels) 16:9 |
| Type |
Laser phosphor with Christie BoldColor Technology |
| Typical lifetime |
20,000 hrs to 50% |
| Signal inputs |
| Standard |
• HDMI x 2 (one on rear panel, one on bottom of projector, independently selectable) • 3GSDI x 1 (BNC)
• DVI-D x 1 (digital only) • HD15 x 1 • USB x 1 (Type A) • Wi-Fi® dongle (optional) • HDBaseT x 1 |
| Signals |
• HDTV formats VGA through to WUXGA (1920 x 1200)
• Horizontal and vertical scaling while maintaining aspect ratio, all inputs |
| 3D |
• HDMI 1.4, HDBaseT – frame packed, top/bottom, side-by-side (up to 120Hz output)
• 3D sync in (BNC) – for genlocking projectors
• 3D sync out (BNC) – for genlocking projectors, or controlling emitter or polarizer |
| Pixel clock |
162MHz |
| Scan rates |
Horizontal: 15kHz to 91kHz • Vertical: 24Hz to 85Hz |
| Signal outputs |
| Monitor out (loop-through) |
3GSDI x 1 (BNC) • HDMI x 1 (HDMI out) |
| Control and networking |
| Control and networking |
• RS-232 in • Control via HDBaseT • Ethernet (10/100) RJ45 • Built-in backlit keypad
• Wired remote control (3.5mm stereo) • Loop out available for daisy chaining • 12VDC trigger at 200mA (ID:2.5mm) |
| Lenses |
| Mount type |
• Boresight adjustable • Motorized horizontal and vertical lens offset (memory available)
• Motorized zoom and focus adjustment (memory available for full ILS lenses) |
| Lens options |
• 0.84-1.02:1 zoom lens (no zoom/focus memory) • 1.02-1.36:1 zoom lens (no zoom/focus memory)
• 1.2-1.5:1 zoom lens (full ILS) • 1.5-2.0:1 zoom lens (full ILS) • 2.0-4.0:1 zoom lens (full ILS) • 4.0-7.0:1 zoom lens (full ILS) |
| Offsets for full ILS lenses |
• ±140% Vertical
• ±50% Horizontal |
| Offsets for 0.84-1.02 |
• +108/-74% Vertical
• +29/-42% Horizontal |
| Offsets for 1.02-1.36 |
• +125/-98% Vertical
• +40/-49% Horizontal |
| Accessories |
| Standard |
• IR remote w/wired remote jack (wire not included)
• AC line cord for projector head
• User manual |
| Optional |
• Christie One Rigging Frame • Lens adapter for E Series lenses
• 1DWUSB-BGN (wireless dongle for video and control) • Christie HS Series fog filter refills (1 set)
• Christie HS Series fog filter covers and filters (order once per projector then only filter refills)
• Christie One Mount Plus • One Mount Extender Rod • Replacement remote control
• One Mount Rigging Kit (used with One Mount, One Mount Plus and/or One Mount Extender Rod) |
| Power requirements |
| Operating voltage |
Normal mode: 110-240 VAC @ 50/60Hz |
| Power consumption |
• Normal mode: 1250W ±15% (220 VAC), 1300W ±15% (110 VAC)
• ECO1 mode: 1020W ±15% (220 VAC), 1050W ±15% (110 VAC)
• ECO2 mode: 700W ±15% (220 VAC), 700W ±15% (110 VAC) |
| Operating current |
• Normal mode: 6.0A ±15% (220 VAC), 11.9A ±15% (110 VAC)
• ECO1 mode: 4.7A ±15% (220 VAC), 9.6A ±15% (110 VAC)
• ECO2 mode: 6.5A ±15% (220 VAC), 3.2A ±15% (110 VAC) |
| Dissipation |
• Normal mode: 4450 BTU/hr
• ECO1 mode: 3600 BTU/hr
• ECO2 mode: 2450 BTU/hr |
| Audible noise |
| Audible noise |
Typical: 45dBA • Eco mode: 39dBA |
| Physical |
| Size (LxWxH) |
26.65 x 23.46 x 7.99" (677 x 596 x 203mm) w/o feet |
| Shipping size (LxWxH) |
36.34 x 33.19 x 20.2" (923 x 843 x 513mm) |
| Weight (w/o lens) |
93.7lbs (42.5kg) |
| Shipping weight |
119lbs (54kg) |
| Operating environment |
| Temperature |
32-104°F (0-40°C) |
| Humidity |
0-85% non-condensing |
| Regulatory |
| Regulatory |
• Contact Christie for the timing of certifications: UL/CSA/IEC 60950-1, FCC Class A, CE, FDA, CCC, KC, PSE, CU,
SABS, BIS, VCCI, RCM, Ukr, TER, SASO
• This product conforms to all relevant European directives, standards, safety, health and environmental concerns
• RoHS, REACH, WEEE |
| Warranty |
| Warranty |
• Three years parts and labor on the projector
• Three years or 15,000 hours parts and labor on the illumination system1
• Contact an authorized Christie representative for full details of our limited warranty |