| Model: DHD1075-GS BLACK Specifications |
| ISO lumens |
10,000 |
| Contrast ratio |
Full On/Off (Christie Real Black enabled): 300,000:1 , Full On/Off (Christie Real Black disabled): 1,200:1 |
| Resolution |
HD (1920 x 1080) |
| Scan rates |
Horizontal: 15-91kHz Vertical: 24-85Hz |
| Signal outputs |
- 3GSDI x 1 (BNC) |
| Lens options |
- Lens UST 0.36, Ultra short throw lens, 700/850/1075-GS
- Lens 0.75-0.95 Zoom G/GS
- Lens 0.95-1.22 Zoom G/GS
- Lens Zoom HP G/GS 1.22-1.52 (All G & GS)
- Lens 1.52-2.89 Zoom G/GS
- Lens 2.9-5.50:1 Zoom G/GS |
| Dissipation |
- Normal Mode: 3651 BTU/hr
- ECO1 Mode 2952 BTU/hr
- ECO2 Mode: 1843 BTU/hr |
| Weight |
54.9 lb (24.9 kg) w/o lens |
| Operating environment |
- 0 to 40° C (32 to 104° F), 0-2500 ft altitude
- 0 to 40° C (32 to 104° F), 0-2500 ft altitude
- Humidity: 0 - 85% non-condensing |
| ANSI lumens |
8,800 |
| Dynamic contrast |
6,000:1 |
| Illumination type |
Laser phosphor with Christie BoldColor Technology |
| Pixel clock rate |
162 MHz (1600 x 1200); 154 MHz (1920 x 1200) |
| Control & networking |
- RS232 In
- Control via HDBaseT
- Ethernet (10/100) RJ45 with ChristieNET connectivity
- Built-in Backlit Keypad
- Wired Remote Control (3.5mm stereo) - Loop out available for daisy chaining |
| Lens offsets (max) |
+/- 120% Vertical
+/- 30% Horizontal |
| Audible Noise (typical 2x Wheel Speed) |
- 32dB(A) Eco2 Mode
35dB(A) Normal Mode |
| Shipping dimensions (L x W x H) |
24.1 x 30.4 x 14.9” (599 x 759 x 373mm) |
| Regulatory |
- Contact Christie for timing of certifications: UL/CSA/IEC 60950-1
- FCC Class A, CE, FDA, CCC, KC, PSE, EAC, BIS, VCCI, RCM, TER
- This product conforms to all relevant European directives, standards, safety, health and environmental concerns
- RoHS, REACH, WEEE |
| Color wheel |
4 Segment (RGBY) - 2X or 3X speed |
| Display type |
1 x 0.65" DMD |
| Illumination performance (hrs) |
20,000 to 50% brightness |
| Signal inputs |
- HDMI x 2 (One on rear panel, one on bottom of projector, independently selectable)
- 3GSDI (BNC)
- DVI-D (Digital only)
- HD15
- USB (Type B mini) - Display over USB
- USB (type A) - Image Viewer or WiFi Dongle (optional)
- RS232 in
- HDBaseT (RJ45)
- Ethernet (10/100) RJ45
- Built-in backlit keypad
- Wired remote control (3.5mm stereo) – loop out available for daisy chaning
3D:
- HDMI 1.4, HDBaseT - Frame Packed, Top/Bottom, Side By Side/frae sequential (up to 1080p @ 120 Hz)
- Up to 1080p @ 120Hz output
- 3D Sync In (BNC) - for genlocking projectors
- 3D Sync Out (BNC) - for genlocking projectors or controlling emitters
Signals:
- HDTV formats VGA through to WUXGA (1920 x 1080)
- Horizontal and vertical scaling while maintaining aspect ratio, all inputs |
| Lens mount |
- Boresight adjustable
- Motorized horizontal and vertical lens offset
- Motorized zoom and focus adjustment |
| Power requirements |
Operating voltage:
- Normal: 100-240 VAC @ 50/60 Hz (w/ 15A fuse)
Power consumption:
- Normal Mode: 1070W
Operating current:
- Normal Mode: 10A (100V-240V) |
| Dimensions (L x W x H) |
19.2 x 22.2 x 7.6"
480 x 555 x 190mm w/o feet or le |
| Shipping weight |
69.9 lb (31.7 kg) |
| Limited warranty |
- 3 years parts and labor on the projector
- 3 years or 20,000 hours parts and labor on the illumination system*
- Contact an authorized Christie representative for full details of our limited warranty
- *Please reference the Christie Standard Limited Warranty document for details. |