| Model: MimioPad 2 Specifications |
| Data Transfer Rate - Wireless |
16 kbps |
Power options
(default/priority order) |
3.7V 700mAh Lithium Ion Rechargeable "Nokia type" battery
USB connection to the computer (also required to recharge battery onboard tablet) |
Pad Battery Life
(fully charged) |
16 hours continuous |
| Tablet Weight |
0.65 kg (1.43 lb.) with battery. |
| Complete Packaged System Weight |
Weight 1.15 kg (2.5 lb) with tablet, styli, cable, and battery. |
| Tablet Dimensions |
24.3 cm H x 27.9 cm W x 2 cm D (9.5 in. H x 11 in. W x 0.8 in. D) |
| Tablet Active Surface Area |
20.3 cm W x 16.2 cm H (8 in. W x 6.4 in. H) |
| Resolution |
2000 Lines Per Inch |
| Stylus Pen |
- Electromagnetic pen (optionally tethered to Tablet) is powered by single AAA Alkaline or Rechargeable battery (included).
- Moving pen over tablet active surface hovers the cursor over the desktop. Touching pen tip to Tablet active surface is Left Click.
- Buttons on pen initiate Right Click with touch or from Hover.
|
| Levels of Pressure Sensitivity |
1024 |
| Pen Reading Height |
0.39 in. (10 mm) |
| Pen Report Rate |
120 RPS |
| Pen Accuracy |
±0.42 mm |
| Controls & Indicators on the Tablet |
- 16 Icon Shortcut Keys at top edge of Tablet Active Surface area activate mimio Tools functions.
- 2 Buttons active Page Up/Page Down functions.
- Scroll Wheel track permits use of pen for easy control of Sound Volume
- On / Off button
- LCD display (1.5" x 0.6" • 3.8 cm x 1.5 cm) indicates Battery charge status, wireless link and device ID.
|
| Use with Interactive Whiteboard |
Mimio Pad can be used as a stand-alone interactive device or in tandem with an Interactive Whiteboard. If used with a mimio Interactive Whiteboard system both devices can be supported an used from a single activated installation of mimio Studio software. |
| Multiple Devices |
Up to 50 mimio Pads can be supported from a single mimio Pad wireless receiver. Each device will be assigned a unique Device number displayed in the LCD panel on the Tablet. mimio Pad can be "re-paired" to another or separate wireless receiver to return to independent use. |
| Certification & Compliance |
FCC / CE / BSMI / SRRC / KCC / VCCI / C-Tick |
| Computer Interface – RF Wireless |
RF wireless interface employs a 2.4 GHz bidirectional, point-to-point, wireless interface between the MimioPad USB-connected receiver on the computer*. Utilizes direct-sequence, spread-spectrum transmission protocol. USB Cable – “micro-B” 5-pin male cable to female receptacle on MimioPad. Standard USB connection to host PC to recharge battery and use without wireless receiver. |
| Minimum Software Requirements |
MimioStudio 10* and higher on a Windows, Mac, or Linux OS. For specific system requirements, please visit mimio.com/support/downloads. |